SOLCRY®
Home / Applications

CICP Pigment Applications

Quick answerCICP pigments serve five application families: coatings (automotive, coil, powder and architectural), plastics and polymer masterbatch, ceramics and glass, construction materials (concrete, roofing, fibre cement, cool surfaces), and high-temperature and defence work. The grade choice inside each one is driven by the matrix as much as by the colour.

Matching the crystal to the matrix

The same colour is available in more than one crystal structure, and the structure is what decides whether a pigment survives a given application. Spinel and corundum–hematite grades are the chemically inert ones, chosen for concrete, exterior coatings, PVC and chemical exposure. Rutile grades are the optically strong ones, chosen where opacity and tinting strength drive the formulation cost.

Every grade in the range carries the same durability envelope — 800 °C heat resistance by CF-33, grade 8 light fastness, 30+ years of weathering and pH 1–14 chemical resistance — so the application decision is about matching the crystal to the process, not about ranking grades by quality.

Where the five application families overlap

A coil coating and a fibre cement panel are both exterior building products, but one is a thin polymer film cured at line speed and the other is a dense alkaline matrix. A ceramic glaze and a powder coating are both fired or baked, but only one of them melts. Reading an application page is therefore a matter of identifying the stress that limits the system — heat, alkali, ultraviolet, abrasion or chemical attack — and choosing the grade that is strongest against it.

CICP Pigments for Coatings

CICP pigments for automotive, coil, powder and architectural coatings: rutile opacity, 800 °C heat resistance and 30+ years of exterior colour retention.

View details →

CICP Pigments for Plastics and Polymer Masterbatch

CICP pigments for engineering resins, PVC profiles and masterbatch: 800 °C heat resistance, no warpage in PVC, and dispersion guidance for oxide blacks.

View details →

CICP Pigments for Ceramics and Glass

CICP pigments for ceramic glazes, porcelain stoneware and glass: cobalt aluminate blue fired at 1230 °C, ΔE*ab 0.7 after eight years of exterior exposure.

View details →

CICP Pigments for Construction Materials

CICP pigments for concrete, roofing, fibre cement and cool surfaces: permanent colour in an alkaline matrix, 30+ years weathering and TSR values above 40%.

View details →

CICP Pigments for High-Temperature and Defence Applications

CICP pigments for aerospace, military and solar applications: 800 °C heat resistance, foliage-matched NIR reflectance and 30+ years of exterior durability.

View details →

Frequently asked questions

What are the main applications of CICP pigments?

Coatings, plastics and masterbatch, ceramics and glass, construction materials, and high-temperature and defence work. Each has a different limiting stress, which is what drives grade selection.

Which application uses the most CICP pigment?

Coatings, particularly architectural and coil coatings, where exterior colour retention over decades is the value the pigment delivers.

Can one grade serve several applications?

Often yes. The durability envelope is the same across the range, so a grade chosen for a coating can frequently serve a plastic or a glaze — the constraint is the processing temperature and the matrix chemistry, not the colour.