SOLCRY®
Home / Applications / Coatings

CICP Pigments for Coatings

Quick answerCoatings are the largest application for CICP pigments because the same properties solve four different problems: rutile grades provide opacity in thin films, spinel grades survive chemical and exterior exposure, all grades hold 800 °C heat resistance through the cure, and the inorganic chemistry removes the ultraviolet failure mechanism entirely.

Why CICP pigments dominate exterior coatings

An exterior coating fails from the top down. Ultraviolet breaks the binder, oxygen and water attack the interface, and the pigment either accelerates that failure or is indifferent to it. An organic pigment absorbs ultraviolet as part of its own colour chemistry, which makes it part of the problem; a CICP pigment absorbs only in narrow visible bands and is transparent across most of the ultraviolet and near-infrared, so it does not contribute to binder degradation.

The same crystal gives the coating its colour permanence. There is no dye to migrate into the binder, no volatile fragment to be lost and no organic structure to oxidise. What the formulator gets is a pigment that behaves as an inert, coloured particle for the life of the film.

The four coating segments

Grade selection by coating type

Coil and architectural coatings benefit most from the rutile yellows: P.Br 24 (CAS 68186-90-3) and P.Y 53 (CAS 8007-18-9) bring opacity and tinting strength, and the ten-year South Florida data on Y3124 shows ΔE*ab 1.3 in a 70% PVDF system. Powder coatings care about the cure schedule, where 800 °C heat resistance means the oven is never the constraint.

For blacks, blues and browns the spinel grades do the work: P.Bk 28 (CAS 68186-91-4), P.Bk 27 (CAS 68186-97-0), P.B 28 (CAS 1345-16-0), P.B 36 (CAS 68187-11-1) and P.Br 33 (CAS 68186-88-9) all hold from pH 1 to pH 14, which covers acid rain, salt spray and industrial atmospheres. P.Br 29 (CAS 12737-27-8) covers the fired and high-temperature coatings where the corundum–hematite structure is wanted.

Testing a coating pigment

The methods are the same across the range: ASTM D-281 · ISO 787-9 · ISO 787-10 · ISO 7724 · DIN 5033 · CF-32 · CF-33 · EN 71-3 · RoHS. Colour is measured to ISO 7724 and DIN 5033, heat resistance to CF-32 and CF-33, light fastness on the blue wool scale, and weathering over 5000 h of xenon-arc exposure. A pigment specification that names those methods and the C.I. identity is closed against substitution.

Frequently asked questions

Which CICP pigments are used in coil coatings?

The rutile yellows P.Br 24 (CAS 68186-90-3) and P.Y 53 (CAS 8007-18-9) for opacity and colour, with P.Bk 28, P.B 28 and P.B 36 for blacks and blues. Ten-year South Florida data on Y3124 shows ΔE*ab 1.3 in PVDF.

Do CICP pigments survive a powder coating cure?

Yes. Powder coatings cure around 180–200 °C, well below the 800 °C heat resistance of the range (CF-33, 60 min, ΔE*ab ≤3.0).

Are CICP pigments suitable for automotive coatings?

Yes. The grades are used in automotive and refinish systems, with grade 8 light fastness and 30+ years of weathering behind the durability claim.