CICP Brown Pigments — Pigment Brown 33 and Pigment Brown 29
| Model | C.I. pigment | C.I. name | CAS | Crystal form | Heat resistance | Light fastness |
|---|---|---|---|---|---|---|
| BR3201 | Pigment Brown 33 | Zinc Iron Chromite Brown Spinel | 68186-88-9 | Spinel | 800 °C / ΔE*ab ≤3.0 | 8 (blue wool) |
| BR3202 | Pigment Brown 33 | Zinc Iron Chromite Brown Spinel | 68186-88-9 | Spinel | 800 °C / ΔE*ab ≤3.0 | 8 (blue wool) |
| BR3215 | Pigment Brown 29 | Iron Chrome Brown Hematite | 12737-27-8 | Corundum/Hematite | 800 °C / ΔE*ab ≤3.0 | 8 (blue wool) |
| BR3216 | Pigment Brown 29 | Iron Chrome Brown Hematite | 12737-27-8 | Corundum/Hematite | 800 °C / ΔE*ab ≤3.0 | 8 (blue wool) |
All 4 grades in the brown series. Full colour and processing data are on each grade TDS.
Spinel versus hematite: two structures, one colour family
P.Br 33 is a zinc iron chromite brown spinel, and P.Br 29 is an iron chrome brown hematite that belongs to the corundum–hematite family. The spinel lattice is cubic close-packed with cations in tetrahedral and octahedral sites; the hematite lattice is built from close-packed oxygen with two-thirds of the octahedral sites filled. Both are dense, inert oxides, and both are classified by their crystal structure rather than by their shade.
The practical difference is where each one earns its place. The spinel is the processing-neutral choice for PVC and other thermoplastic compounds, where it does not disturb the polymer's morphology. The hematite is the harder, more refractory choice, and it is specified where the coating is fired or where abrasion resistance matters alongside colour.
Brown in PVC and construction
BR3201 has been used in PVC window profile co-extrusion for long enough that its behaviour is characterized: zero warpage, compatibility with tin, Ca/Zn and organic stabilizer systems, and fifteen-year colour retention with ΔE*ab below 1.5 on installed profiles. A brown profile is a demanding test because it absorbs solar energy and runs hotter than a white one, so any weakness in the pigment shows up sooner.
In concrete and masonry the same chemistry faces a different stress: an alkaline pore solution around pH 12–13 that slowly carbonates. The spinel lattice is inert to that matrix, and the pH 1–14 chemical resistance of the CICP family covers both the alkaline end where concrete lives and the acidic end where acid rain and cleaning agents sit.
Where the brown series is specified
- PVC window profiles, siding and co-extruded building products
- Concrete pavers, roof tiles and architectural precast
- Architectural, industrial and powder coatings
- High-temperature and refractory-facing coatings (P.Br 29)
- Engineering plastics and masterbatch
Choosing between the four grades
Match the structure to the matrix first. If the brown goes into PVC or another thermoplastic, choose the spinel grades and check the processing behaviour on the line. If it goes into a fired coating, a refractory application or a surface that will be abraded, choose the hematite grades. Then choose the code inside the pair on the secondary data in the TDS.
BR3215 — Pigment Brown 29
Iron Chrome Brown Hematite, CAS 12737-27-8, Corundum/Hematite.
View details →BR3216 — Pigment Brown 29
Iron Chrome Brown Hematite, CAS 12737-27-8, Corundum/Hematite.
View details →Frequently asked questions
What is Pigment Brown 33?
Zinc iron chromite brown spinel, CAS 68186-88-9. It is the chemistry behind BR3201 and BR3202, and the grade used for PVC window profile co-extrusion and construction products.
What is Pigment Brown 29?
Iron chrome brown hematite, CAS 12737-27-8, a corundum–hematite pigment supplied as BR3215 and BR3216 for fired, high-temperature and abrasion-resistant applications.
Do the brown grades hold their colour in concrete?
The CICP browns are stable from pH 1 to pH 14, which covers the alkaline pore solution of fresh concrete and the pH drop caused by carbonation. Grade-specific field data is available on request.