SOLCRY®
Home / Articles / Understanding NIR Reflectance in CICP Pigments:

Understanding NIR Reflectance in CICP Pigments: A Technical Guide for Cool Roofing Applications

Quick answerCICP pigments keep visible absorption and near-infrared transparency in the same crystal: a dark roof pigmented with them can reach a Total Solar Reflectance of 25-40%, against 5-10% for the same shade in carbon black. This guide covers the mechanism, the grades used and how to specify TSR.

Why a dark roof needs a different pigment

A roof absorbs solar energy across the whole spectrum, but only the visible part has to be dark to satisfy the architect. Roughly half of the sun's energy arrives in the near-infrared, above 700 nm, where the eye is blind. A conventional black or dark-brown coating converts that radiation into heat because carbon black absorbs almost uniformly from 400 nm to well past 2500 nm, so the surface temperature climbs and the cooling load follows it.

Cool-roof specification breaks that link: keep the visible shade the designer asked for, drop the NIR absorption. A dark roofing material pigmented with NIR-reflective CICP reaches a Total Solar Reflectance of 25-40%, against 5-10% for the same colour built on carbon black. Published studies put the cooling-load reduction in the 15-25% range for buildings with NIR-reflective roofing in warm climates, and the same data supports LEED and Energy Star submissions.

The crystal mechanism behind selective reflectance

In a CICP pigment the colour comes from electronic transitions inside a stable oxide lattice: ligand-field transitions of Ni²⁺, Co²⁺, Cr³⁺ and Fe³⁺ held in octahedral or tetrahedral sites. Those transitions are narrow and sit in the visible. Between and beyond them the lattice has no absorption bands, so near-infrared photons are either transmitted through the crystal or scattered at its surface instead of being converted into heat.

Both host structures used by SOLCRY show that window. Rutile (MO₂) has a tetragonal cell and a high refractive index, which is why rutile pigments deliver opacity and tinting strength. Spinel (AB₂O₄) has a cubic close-packed oxygen lattice that gives exceptional chemical inertness. Neither host gains NIR absorption from the colouring cation, which is why two pigments with the same visible shade can behave completely differently once the spectrum runs past 700 nm.

Which grades carry the NIR performance

Nickel antimony titanium yellow (P.Y 53, CAS 8007-18-9) and cobalt titanate greens of the P.G 50 family are the workhorses of cool-roof formulations. Their rutile and spinel hosts allow near-infrared transparency while the chromophore keeps full visible chroma, so a dark green or ochre roof can still post a TSR that reads as a light-coloured surface on an energy model. Chrome antimony titanium brown rutile (P.Br 24, CAS 68186-90-3) covers the warm end of the palette from the same rutile host.

Greens for roofing usually come from two families: cobalt titanate greens of the P.G 50 family where the highest TSR is wanted, and chromium oxide green (P.G 17, Cr₂O₃, CAS 1308-38-9) where a darker, more olive shade is specified. Both carry the same durability envelope - 800 °C heat resistance by CF-33 with ΔE*ab at or below 3.0, grade 8 light fastness on the blue wool scale, and 30+ years of exterior weathering backed by 5000 h of xenon-arc exposure - so the choice between them is spectral, not structural.

Measuring TSR and reporting it honestly

TSR is an integrated value: the fraction of solar radiation reflected, weighted by the solar irradiance curve and summed from the ultraviolet through the near-infrared to about 2500 nm. Two coatings that look identical in a showroom can differ by thirty points of TSR, which is why a single headline number without the underlying curve is marketing rather than data. Ask for the reflectance spectrum of the exact grade, measured on the pigment as it will be dispersed.

Colour and durability should be reported with the same discipline. In the SOLCRY test set, colour is measured to ISO 7724 and DIN 5033, heat resistance to CF-33 and CF-32, light fastness on the blue wool scale to grade 8, and weathering over 5000 h of xenon-arc exposure. Pigment chemistry is checked by ISO 787-9 and ISO 787-10, and the same batch carries EN 71-3 and RoHS declarations where the application calls for them.

A specification checklist for cool-roof pigments

Start with the spectrum rather than the colour card. Ask for the TSR curve of the exact grade at the particle size you will use, because scattering changes with milling. Confirm heat resistance to 800 °C by CF-33 and light fastness grade 8 on the same certificate of analysis. Check chemical resistance across pH 1-14 if the roof will see acid rain or aggressive cleaning. Then confirm the C.I. name, CAS number and crystal form against the TDS so the grade cannot be substituted by a look-alike.